News
February 9, 2023: Robot TCP and Mastering Recovery
A Korean car manufacturer in Mexico has selected the DynaCal system for recovery
of the robot mastering and TCP. The robot mastering/TCP can be changed due to a crash or replacement of the end-effector or replacement
of the robot motors. DynaCal system quickly recovers the robot mastering and TCP thus saving valuable production time for the
customer that would be required for re-teaching the robot positions after the crash or replacement.
February 20, 2022:
Robot Zero-position Mastering
A Japanese robot manufacturer has selected the DynaCal system to calibrate the zero-position mastering
of their robots for a plant in China. Every robot manufactured in this plant are calibrated for their zero-position mastering
using the DynaCal system before shipping them out to their customers. The DynaCal system quickly and accurately identifies the robot
zero-position.
April 1, 2021: Off-Line Programming of a Milling Robot
A Michigan based integrator has selected DynaCal system
to provide robot-cell Absolute Accuracy and to enable off-line programming for their robotic milling cell. The robot-cell is
simulated in RobotMaster and the milling programs, using various tools, are created in the simulation software. The DynaCal system
is utilized by the integrator to identify the Absolute Accuracy parameters of the robot-cell, including the TCP, User Frame, and the
robot geometric/non-geometric parameters. The DynaCal Filter Module is then utilized to compensate the milling robot positions
created in the simulation environment to account for the differences between the simulation robot-cell and the actual robot-cell,
providing the required high accuracy.
January 9, 2020: Accuracy for Robotic Stone Sculpting
Dynalog's Dynacal system has been selected by an American Robotic Stone Sculpting integrator to provide robot-cell Absolute Accuracy and to enable off-line programming for their robotic stone sculpting cells installed in their plant. The integrator uses the DynaCal system to identify the Absolute Accuracy parameters of the robot-cell. Furthermore, with the identified robot-cell parameters, the DynaCal Filter Module compensates the large amount of robot positions created in a simulation environment to account for the differences between the simulation robot-cell and the actual robot-cell. The precision provided by the calibrated robot-cell meets the requirements of their stone sculpting process.
Dynalog's Dynacal system has been selected by an American Robotic Stone Sculpting integrator to provide robot-cell Absolute Accuracy and to enable off-line programming for their robotic stone sculpting cells installed in their plant. The integrator uses the DynaCal system to identify the Absolute Accuracy parameters of the robot-cell. Furthermore, with the identified robot-cell parameters, the DynaCal Filter Module compensates the large amount of robot positions created in a simulation environment to account for the differences between the simulation robot-cell and the actual robot-cell. The precision provided by the calibrated robot-cell meets the requirements of their stone sculpting process.
June
6, 2019: Certificate of Appreciation
Pierre de Smet, President of Dynalog, Inc. with offices located in Bloomfield Hills, Oakland County,
Michigan was just awarded a certificate of appreciation in recognition of his continued participation for the past five years on the
Industrial Advisory Board at Lawrence Technological University.
June 3, 2019: Trade Show
Dynalog will participate in the 21st China International Industry Fair (CIFF) 2019, which takes place from Septrmber 17th to 21st, 2019, in Shanghai. Worldwide Technologies, Dynalog's distributor in China, will present Dynalog products: the DynaCal™ robot-cell calibration system, the roPOD™ (TCP + robot) recovery system, the AccuBeam™ robot temperature compensation system, the DynaGuide™ robot adaptive control and guidance system, the DynaFlex™ robot gauging system, and the CompuGauge™ robot performance analysis system. Visit this link for more information:http//www.ciif-expo.com/en. We look forward to meeting with you at this event.
Dynalog will participate in the 21st China International Industry Fair (CIFF) 2019, which takes place from Septrmber 17th to 21st, 2019, in Shanghai. Worldwide Technologies, Dynalog's distributor in China, will present Dynalog products: the DynaCal™ robot-cell calibration system, the roPOD™ (TCP + robot) recovery system, the AccuBeam™ robot temperature compensation system, the DynaGuide™ robot adaptive control and guidance system, the DynaFlex™ robot gauging system, and the CompuGauge™ robot performance analysis system. Visit this link for more information:http//www.ciif-expo.com/en. We look forward to meeting with you at this event.
March 7, 2019: NEW PRODUCT!
We are very excited
to introduce our new product roPOD™. This new product, roPOD, replaces the AutoCal product, and similar to the AutoCal system,
provides the recovery of robot's TCP and zero-position-mastering after a crash, replacement of motor, replacement of end-effector,
etc. The roPOD system is faster than the AutoCal system, and it has a much smaller foot print. Click here to view the roPOD data
sheet, or contact Anil Raghavan for additional information or a quotation
September 18, 2018: A Japanese Robot Manufacturer Selects
Dynalog's IdentiCal System
Dynalog's IdentiCal system has been selected by a Japanese robot manufacturer for calibration of their
robots. The IdentiCal system is utilized to identify the robot's zero-position mastering, which is updated in the robot
controller before the robot is shipped to their customer.
July 25, 2018: Trade Show
Along with our Chinese distributor, Worldwide Technologies, we displayed our products at the China International Robot Show (CIROS) in Shanghai, China. Click here to read the news release.
Along with our Chinese distributor, Worldwide Technologies, we displayed our products at the China International Robot Show (CIROS) in Shanghai, China. Click here to read the news release.
July 2, 2018: China International Robot Show 2018
Dynalog will participate in the China International Robot Show (CIROS) 2018, which takes place from July 4th to July 7th, 2018, in Shanghai. Worldwide Technologies, Dynalog's distributor in China, will present Dynalog products: the DynaCal™ robot-cell calibration system, the AutoCal™ (TCP + robot) recovery system, the AccuBeam™ robot temperature compensation system, the DynaGuide™ robot adaptive control and guidance system, the DynaFlex™ robot gauging system, and the CompuGauge™ robot performance analysis system. Visit this link for more information: http://en.ciros.com.cn. We look forward to meeting with you at this event.
May 14, 2018: A Japanese Auto Maker Selects Dynalog's DynaCal System
Dynalog's Dynacal system has been selected by a Japanese auto maker in the US for recovery of their robot programs after a crash, moved fixture, replacement of robot motors, and replacement of end-effector. A reference signature of the robot-cell is acquired with the DynaCal system when the robot-cell is performing its production job accurately. After a change in the robot-cell, e.g. tool crash, the DynaCal system is utilized to identify the difference in the robot-cell signature compared to the reference signature. The differences are updated in the robot controller, i.e. TCP, User Frame, and Zero-Position-Mastering are updated in the robot controller, which recovers the robot programs to its previous accurate state.
November 14, 2017: An American Aeronautic System Integrator Selects Dynalog's DynaCal System
Dynalog's Dynacal system has been selected by an American aerospace system integrator to provide robot-cell Absolute Accuracy and to enable off-line programming for their robotic drilling cells installed in their Mexican plant. The integrator uses the DynaCal system to identify the Absolute Accuracy parameters of the robot-cell. Furthermore, with the identified robot-cell parameters, the DynaCal Filter Module compensates the robot positions created in a simulation environment to account for the differences between the simulation robot-cell and the actual robot-cell. The precision provided by the calibrated robot-cell meets the requirements of their robotic drilling process.
Dynalog will participate in the China International Robot Show (CIROS) 2018, which takes place from July 4th to July 7th, 2018, in Shanghai. Worldwide Technologies, Dynalog's distributor in China, will present Dynalog products: the DynaCal™ robot-cell calibration system, the AutoCal™ (TCP + robot) recovery system, the AccuBeam™ robot temperature compensation system, the DynaGuide™ robot adaptive control and guidance system, the DynaFlex™ robot gauging system, and the CompuGauge™ robot performance analysis system. Visit this link for more information: http://en.ciros.com.cn. We look forward to meeting with you at this event.
May 14, 2018: A Japanese Auto Maker Selects Dynalog's DynaCal System
Dynalog's Dynacal system has been selected by a Japanese auto maker in the US for recovery of their robot programs after a crash, moved fixture, replacement of robot motors, and replacement of end-effector. A reference signature of the robot-cell is acquired with the DynaCal system when the robot-cell is performing its production job accurately. After a change in the robot-cell, e.g. tool crash, the DynaCal system is utilized to identify the difference in the robot-cell signature compared to the reference signature. The differences are updated in the robot controller, i.e. TCP, User Frame, and Zero-Position-Mastering are updated in the robot controller, which recovers the robot programs to its previous accurate state.
November 14, 2017: An American Aeronautic System Integrator Selects Dynalog's DynaCal System
Dynalog's Dynacal system has been selected by an American aerospace system integrator to provide robot-cell Absolute Accuracy and to enable off-line programming for their robotic drilling cells installed in their Mexican plant. The integrator uses the DynaCal system to identify the Absolute Accuracy parameters of the robot-cell. Furthermore, with the identified robot-cell parameters, the DynaCal Filter Module compensates the robot positions created in a simulation environment to account for the differences between the simulation robot-cell and the actual robot-cell. The precision provided by the calibrated robot-cell meets the requirements of their robotic drilling process.
June
1, 2017: China International Robot Show 2017
Dynalog will participate in the China International Robot Show (CIROS) 2017, which takes place from July 5th to July 8th, 2017, in Shanghai. Worldwide Technologies, Dynalog's distributor in China, will present Dynalog products: the DynaCal™ robot-cell calibration system, the AutoCal™ (TCP + robot) recovery system, the AccuBeam™ robot temperature compensation system, the DynaGuide™ robot adaptive control and guidance system, the DynaFlex™ robot gauging system, and the CompuGauge™ robot performance analysis system. Visit this link for more information:http://en.ciros.com.cn. We look forward to meeting with you at this event.
Dynalog will participate in the China International Robot Show (CIROS) 2017, which takes place from July 5th to July 8th, 2017, in Shanghai. Worldwide Technologies, Dynalog's distributor in China, will present Dynalog products: the DynaCal™ robot-cell calibration system, the AutoCal™ (TCP + robot) recovery system, the AccuBeam™ robot temperature compensation system, the DynaGuide™ robot adaptive control and guidance system, the DynaFlex™ robot gauging system, and the CompuGauge™ robot performance analysis system. Visit this link for more information:http://en.ciros.com.cn. We look forward to meeting with you at this event.
© 2023 Dynalog, Inc. All Rights Reserved
